Secondary Aluminum

Aluminum - Secondary Production

As the secondary aluminum industry continues to grow Resco understands the importance of high-quality refractory products. Secondary aluminum, also known as recycled aluminum, is already 92% more energy-efficient than primary aluminum. Resco products assist companies in increasing heats and campaigns by improving melting furnaces efficiencies with a durable and resistant product. Additional metals and compounds are often added during the process to achieve the best mixture.

Refractory Material for Melting and Holding Furnaces

The process of aluminum melting can be taxing on the furnace lining. The right refractory linings take into consideration thermal insulation, corrosion resistance, thermal shock, and more. Resco's wide range of brick and castable refractory products will provide the necessary properties needed for your furnace. Our full portfolio is designed for severe conditions at extremely high temperatures.

Contact Resco Products to find the right castable refractory for your application.

Contact our specialists or view our Aluminum Furnace Brochures.  USA and UK Versions available.  

RELATED PRODUCTS
Alumina Brick

Alumex P-85-HSArrow icon

ALUMEX® P-85 HS exhibits a combination of very high strengths, high abrasion resistance, and excellent thermal shock resistance. Its high purity composition yields a refractory product that can withstand severe alkali attack.
PDS SDS
ALUMEX® P-85 HS exhibits a combination of very high strengths, high abrasion resistance, and excellent thermal shock resistance. Its high purity composition yields a refractory product that can withstand severe alkali attack.
Insulating Castable

Castable #16Arrow icon

CASTABLE #16 is an ultra-lightweight refractory concrete with a service limit of 1600oF as a hot face material and 1800oF as a backup insulation. CASTABLE #16 has a good strength to weight ratio and can replace block insulation for many applications. The most useful property is the very low K-factor.
PDS SDS
CASTABLE #16 is an ultra-lightweight refractory concrete with a service limit of 1600oF as a hot face material and 1800oF as a backup insulation. CASTABLE #16 has a good strength to weight ratio and can replace block insulation for many applications. The most useful property is the very low K-factor.
Conventional Castable

EZ Cast 2700Arrow icon

EZ CAST® 2700 is a general purpose, economical castable designed for applications up to 2700°F. Its high strength and ability to be pumped or poured make it the ideal choice for any number of applications where access is limited or obstructions make work difficult. It is particularly effective in applications where destructive gases and atmospheres or excessive wear shorten refractory life.
PDS SDS
EZ CAST® 2700 is a general purpose, economical castable designed for applications up to 2700°F. Its high strength and ability to be pumped or poured make it the ideal choice for any number of applications where access is limited or obstructions make work difficult. It is particularly effective in applications where destructive gases and atmospheres or excessive wear shorten refractory life.
Conventional Castable

EZ Cast 2800Arrow icon

EZ CAST® 2800 is similar to EZ CAST® 2700, except designed for applications up to 2800°F. In the laboratory, this product has tested well for resistance to CO (carbon monoxide) disintegration encountered in coke ovens and blast furnaces.
PDS SDS
EZ CAST® 2800 is similar to EZ CAST® 2700, except designed for applications up to 2800°F. In the laboratory, this product has tested well for resistance to CO (carbon monoxide) disintegration encountered in coke ovens and blast furnaces.
Conventional Castable

EZ Cast 2800 FineArrow icon

EZ CAST® 2800 FINE is a Fine-Grained, Conventional Cement, 45% Alumina castable that can be installed by vibration cast, pumpcasting, or self-leveling methods.
PDS SDS
EZ CAST® 2800 FINE is a Fine-Grained, Conventional Cement, 45% Alumina castable that can be installed by vibration cast, pumpcasting, or self-leveling methods.
Low Cement Castable

EZ Cast 3000Arrow icon

EZ CAST® 3000 is a self-flowing, low iron, 56% alumina, low cement castable designed to provide high strength and good thermal shock and abrasion resistance. It offers good slag resistance for severe applications up to 3000°F. In the laboratory, this product has shown excellent resistance to CO atmospheres found in coke ovens and blast furnaces. Large volumes of this castable have been used successfully in a wide variety of applications.
PDS SDS
EZ CAST® 3000 is a self-flowing, low iron, 56% alumina, low cement castable designed to provide high strength and good thermal shock and abrasion resistance. It offers good slag resistance for severe applications up to 3000°F. In the laboratory, this product has shown excellent resistance to CO atmospheres found in coke ovens and blast furnaces. Large volumes of this castable have been used successfully in a wide variety of applications.
Low Cement Castable

EZ Cast 3200Arrow icon

EZ CAST® 3200 is a self-flowing, 76% alumina low cement castable designed to provide longer service life and superior performance in steel applications with temperatures up to 3200°F. It also has outstanding strength and abrasion resistance. In laboratory testing this product has shown excellent resistance to CO atmospheres found in coke ovens and blast furnaces.
PDS SDS
EZ CAST® 3200 is a self-flowing, 76% alumina low cement castable designed to provide longer service life and superior performance in steel applications with temperatures up to 3200°F. It also has outstanding strength and abrasion resistance. In laboratory testing this product has shown excellent resistance to CO atmospheres found in coke ovens and blast furnaces.
Low Cement Castable

EZ Cast 3250Arrow icon

EZ CAST® 3250 is a low cement castable with an alumina content of 78%. It has excellent abrasion resistance and superior hot strength to as high as 2700°F. These properties combined with excellent thermal shock resistance have resulted in many successful installations in bottoms and lip rings of steel ladles. This proven product has been successfully used in a wide variety of applications, often substituted for higher alumina content products, making it a highly cost-effective and versatile composition. Its combination of strength, toughness, alumina content, and other compositional features make it an excellent product for many applications.
PDS SDS
EZ CAST® 3250 is a low cement castable with an alumina content of 78%. It has excellent abrasion resistance and superior hot strength to as high as 2700°F. These properties combined with excellent thermal shock resistance have resulted in many successful installations in bottoms and lip rings of steel ladles. This proven product has been successfully used in a wide variety of applications, often substituted for higher alumina content products, making it a highly cost-effective and versatile composition. Its combination of strength, toughness, alumina content, and other compositional features make it an excellent product for many applications.
Conventional Castable

EZ Cubed 2700Arrow icon

EZ CUBED® 2700 is a conventional cement-bonded, fireclay-based, 42% Alumina castable that can be installed by vibration cast , pumpcasting, self-leveling, or shotcreting methods.
PDS SDS
EZ CUBED® 2700 is a conventional cement-bonded, fireclay-based, 42% Alumina castable that can be installed by vibration cast , pumpcasting, self-leveling, or shotcreting methods.
Conventional Castable

EZ Cubed 2800Arrow icon

EZ CUBED® 2800 is a cement-bonded, fireclay-based, 45% Alumina castable that can be installed by vibration cast , pumpcasting, self-leveling, or shotcreting methods.
PDS SDS
EZ CUBED® 2800 is a cement-bonded, fireclay-based, 45% Alumina castable that can be installed by vibration cast , pumpcasting, self-leveling, or shotcreting methods.
Low Cement Castable

EZ Cubed 3000Arrow icon

EZ CUBED® 3000 is a Low Cement, 55% Alumina castable that can be installed by vibration cast, self-flowing, pumping or shotcreting methods.
PDS SDS
EZ CUBED® 3000 is a Low Cement, 55% Alumina castable that can be installed by vibration cast, self-flowing, pumping or shotcreting methods.
Low Cement Castable

EZ Cubed 3200 FineArrow icon

A low cement, 75% alumina castable with a maximum service temperature of 3200°F. This castable can be used in a wide variety of refractory applications. The product can be installed by vibration casting, pumping, and shotcreting methods.
PDS SDS
A low cement, 75% alumina castable with a maximum service temperature of 3200°F. This castable can be used in a wide variety of refractory applications. The product can be installed by vibration casting, pumping, and shotcreting methods.
Low Cement Castable

EZ Cubed 60 LQYArrow icon

An alkali-resistant 60% alumina castable that can be installed using vibration casting, pumping, or wet shotcreting methods. This product has been formulated to be resistant to alkali attack.
PDS SDS
An alkali-resistant 60% alumina castable that can be installed using vibration casting, pumping, or wet shotcreting methods. This product has been formulated to be resistant to alkali attack.
Low Cement Castable

EZ Cubed 60MArrow icon

Mullite-based/ self flow/pumpable/shotcrete/low cement castable
PDS SDS
Mullite-based/ self flow/pumpable/shotcrete/low cement castable
Low Cement Castable

EZ Cubed 60M XTArrow icon

Mullite-based/ self flow/pumpable/shotcrete/low cement castable
PDS SDS
Mullite-based/ self flow/pumpable/shotcrete/low cement castable
Low Cement Castable

Furnacon 70Arrow icon

FURNACON™ 70 resists the most aggressive magnesium-containing aluminum alloys. It is a costeffective refractory for severe operating conditions. In addition to its non-wetting properties, it has exceptional strength and toughness to resist thermal and mechanical abuse. It is one of the most widely used castables for lower sidewalls and aluminium furnace hearths.
PDS SDS
FURNACON™ 70 resists the most aggressive magnesium-containing aluminum alloys. It is a costeffective refractory for severe operating conditions. In addition to its non-wetting properties, it has exceptional strength and toughness to resist thermal and mechanical abuse. It is one of the most widely used castables for lower sidewalls and aluminium furnace hearths.
Low Cement Castable

Furnacon 95Arrow icon

FURNACON™ 95 resists spalling and cracking from thermal and mechanical abuse. Its high purity, high alumina base makes it ideally suited for troughs and tapholes.
PDS SDS
FURNACON™ 95 resists spalling and cracking from thermal and mechanical abuse. Its high purity, high alumina base makes it ideally suited for troughs and tapholes.
Low Cement Castable

FurnaCubed 40Arrow icon

A 40% alumina low-cement castable that offers excellent resistance to alkalis. It contains a non-wetting agent for aluminum contact, and it can be installed via vibration casting, pumping, and shotcreting methods.
PDS SDS
A 40% alumina low-cement castable that offers excellent resistance to alkalis. It contains a non-wetting agent for aluminum contact, and it can be installed via vibration casting, pumping, and shotcreting methods.
Low Cement Castable

FurnaCubed 65Arrow icon

A 65% alumina low-cement castable that offers excellent resistance to alkalis. It contains a non-wetting agent for aluminum contact, and it can be installed via vibration casting, pumping, and shotcreting methods
PDS SDS
A 65% alumina low-cement castable that offers excellent resistance to alkalis. It contains a non-wetting agent for aluminum contact, and it can be installed via vibration casting, pumping, and shotcreting methods
Low Cement Castable

FurnaCubed 70Arrow icon

FURNACUBED™ 70 is a 74% alumina, non-wetting to aluminum, low cement castable that can be vibration cast, self-flow cast, or shotcreted. This product has excellent thermal shock resistance to 2000°F. It has been used for preformed blocks in an aluminum furnace and has been shotcreted in aluminum furnace upper and lower walls. Unlike other FURNACUBED™ products, this product is recommended for use only in aluminum furnace applications. Therefore, its maximum non-metal contact use temperature is 2500°F.
PDS SDS
FURNACUBED™ 70 is a 74% alumina, non-wetting to aluminum, low cement castable that can be vibration cast, self-flow cast, or shotcreted. This product has excellent thermal shock resistance to 2000°F. It has been used for preformed blocks in an aluminum furnace and has been shotcreted in aluminum furnace upper and lower walls. Unlike other FURNACUBED™ products, this product is recommended for use only in aluminum furnace applications. Therefore, its maximum non-metal contact use temperature is 2500°F.
Low Cement Castable

FurnaCubed 70QTArrow icon

FURNACUBED™ 70 is a 74% alumina, non-wetting to aluminum, low cement castable that can be heated without using the traditional ramp-and-hold heatup schedule. It can be vibration cast, self-flow cast, or shotcreted. This product has excellent thermal shock resistance to 2000ºF. It has been used for preformed blocks in an aluminum furnace and has been shotcreted in aluminum furnace upper and lower walls. Unlike other FURNACUBED™ products, this product is recommended for use only in aluminum furnace applications. Therefore, its maximum non-metal contact use temperature is 2500ºF.
PDS SDS
FURNACUBED™ 70 is a 74% alumina, non-wetting to aluminum, low cement castable that can be heated without using the traditional ramp-and-hold heatup schedule. It can be vibration cast, self-flow cast, or shotcreted. This product has excellent thermal shock resistance to 2000ºF. It has been used for preformed blocks in an aluminum furnace and has been shotcreted in aluminum furnace upper and lower walls. Unlike other FURNACUBED™ products, this product is recommended for use only in aluminum furnace applications. Therefore, its maximum non-metal contact use temperature is 2500ºF.
Low Cement Castable

FurnaCubed 85Arrow icon

A 85% alumina low-cement castable that offers excellent resistance to alkalis. It contains a non-wetting agent for aluminum contact, and it can be installed via vibration casting, pumping, and shotcreting methods.
PDS SDS
A 85% alumina low-cement castable that offers excellent resistance to alkalis. It contains a non-wetting agent for aluminum contact, and it can be installed via vibration casting, pumping, and shotcreting methods.
Low Cement Castable

FurnaCubed 85 QTArrow icon

FURNACUBED™ 85 QT is an aluminum-resistant, 85 % alumina low cement castable that can be heated without using the traditional ramp-and-hold heatup schedule. This product was formulated for use in high wear areas in aluminum reverberatory furnaces and allow for a shorter heatup schedule and less furnace downtime. FURNACUBED™ 85 QT can be installed by vibration casting, pumpcasting, or self-leveling installation techniques.
PDS SDS
FURNACUBED™ 85 QT is an aluminum-resistant, 85 % alumina low cement castable that can be heated without using the traditional ramp-and-hold heatup schedule. This product was formulated for use in high wear areas in aluminum reverberatory furnaces and allow for a shorter heatup schedule and less furnace downtime. FURNACUBED™ 85 QT can be installed by vibration casting, pumpcasting, or self-leveling installation techniques.
Low Cement Castable

FurnaCubed FSArrow icon

FURNACUBED™ FS is a non-wetting, fused silica-based castable for aluminum contact. It has excellent strength and low porosity with good abrasion resistance. It possesses excellent thermal shock resistance because of a very low reversible coefficient of thermal expansion. The product provides extremely good dross resistance and outstanding resistance to spalling at a reasonably low density.
PDS SDS
FURNACUBED™ FS is a non-wetting, fused silica-based castable for aluminum contact. It has excellent strength and low porosity with good abrasion resistance. It possesses excellent thermal shock resistance because of a very low reversible coefficient of thermal expansion. The product provides extremely good dross resistance and outstanding resistance to spalling at a reasonably low density.
Low Cement Castable

FurnaCubed R-MaxArrow icon

Furnacubed™ R-MAX is a 70% alumina high performance castable designed to provide excellent non-wetting characteristics in aluminum contact applications along with maximum abrasion resistance and excellent strengths This material will give superior performance for the belly band area and below the melt line in secondary melting furnaces. Furnacubed™ R-MAX can be installed via vibration casting, pump casting, and wet shotcrete techniques
PDS SDS
Furnacubed™ R-MAX is a 70% alumina high performance castable designed to provide excellent non-wetting characteristics in aluminum contact applications along with maximum abrasion resistance and excellent strengths This material will give superior performance for the belly band area and below the melt line in secondary melting furnaces. Furnacubed™ R-MAX can be installed via vibration casting, pump casting, and wet shotcrete techniques
Pre-Cast Shapes

Mighty Fibre M-HCAArrow icon

MIGHTY FIBRE M is a precast shape made with a castable-bonded, metallic fiber composite for added strength and spalling resistance. MIGHTY FIBRE M precast shapes can be used in applications where mechanical abuse and thermal cycling are normal operating conditions.
PDS SDS
MIGHTY FIBRE M is a precast shape made with a castable-bonded, metallic fiber composite for added strength and spalling resistance. MIGHTY FIBRE M precast shapes can be used in applications where mechanical abuse and thermal cycling are normal operating conditions.
Low Cement Castable

Quikturn 45PCAArrow icon

QUIKTURN 45 PCA is a aluminum-resistant, low cement, 45% alumina castable, that can be installed by vibration cast, pumping, and shotcreting methods. This castable is formulated for aluminum resistance but is intended, primarily, for backup linings. After the final set, this unique castable can be heated without the traditional ramp-and-hold heatup schedule. Refer to the recommended QUIKTURN heatup schedule for initial heatup.
PDS SDS
QUIKTURN 45 PCA is a aluminum-resistant, low cement, 45% alumina castable, that can be installed by vibration cast, pumping, and shotcreting methods. This castable is formulated for aluminum resistance but is intended, primarily, for backup linings. After the final set, this unique castable can be heated without the traditional ramp-and-hold heatup schedule. Refer to the recommended QUIKTURN heatup schedule for initial heatup.
Low Cement Castable

Quikturn 60GArrow icon

QUIKTURN 60G is a mullite-based, low cement, 60% alumina low cement gun mix that can be installed by conventional gunning methods. After the final set, this unique castable can be heated without the traditional ramp-and-hold heatup schedule. Refer to the recommended QUIKTURN heatup schedule for the initial heatup.
PDS SDS
QUIKTURN 60G is a mullite-based, low cement, 60% alumina low cement gun mix that can be installed by conventional gunning methods. After the final set, this unique castable can be heated without the traditional ramp-and-hold heatup schedule. Refer to the recommended QUIKTURN heatup schedule for the initial heatup.
Low Cement Castable

Quikturn 60G (UK)Arrow icon

QUIKTURN 60G is a mullite-based, low cement, 60% alumina low cement gun mix that can be installed by conventional gunning methods. After the final set, this unique castable can be heated without the traditional ramp-and-hold heatup schedule. Refer to the recommended QUIKTURN heatup schedule for the initial heatup.
PDS SDS
QUIKTURN 60G is a mullite-based, low cement, 60% alumina low cement gun mix that can be installed by conventional gunning methods. After the final set, this unique castable can be heated without the traditional ramp-and-hold heatup schedule. Refer to the recommended QUIKTURN heatup schedule for the initial heatup.
Low Cement Castable

Quikturn 60LQY PCArrow icon

An alkali-resistant 60% alumina castable that can be installed using vibration casting, pumping, or wet shotcreting methods. This product has been formulated to be resistant to alkali attack. After the final set, this unique castable can be heated without the traditional ramp-and-hold heatup schedule.
PDS SDS
An alkali-resistant 60% alumina castable that can be installed using vibration casting, pumping, or wet shotcreting methods. This product has been formulated to be resistant to alkali attack. After the final set, this unique castable can be heated without the traditional ramp-and-hold heatup schedule.
Low Cement Castable

Quikturn 60PCArrow icon

QUIKTURN 60PC is a mullite-based, low cement, 60% alumina castable that can be installed by vibration cast, pumping, and shotcreting methods. After the final set, this unique castable can be heated without the traditional ramp-and-hold heatup schedule. Refer to the recommended QUIKTURN heatup schedule for the initial heatup.
PDS SDS
QUIKTURN 60PC is a mullite-based, low cement, 60% alumina castable that can be installed by vibration cast, pumping, and shotcreting methods. After the final set, this unique castable can be heated without the traditional ramp-and-hold heatup schedule. Refer to the recommended QUIKTURN heatup schedule for the initial heatup.
Low Cement Castable

Quikturn 65PCAArrow icon

QUIKTURN 65 PCA is a aluminum-resistant, 60% alumina, low cement castable that can be vibration cast, pumped, or shotcreted. QUIKTURN 65 PCA has excellent strength and resistance to molten aluminum. After the initial set, this castable can be heated without using the traditional ramp-and-hold heatup schedule. Refer to the recommended QUIKTURN heatup schedule for initial heatup.
PDS SDS
QUIKTURN 65 PCA is a aluminum-resistant, 60% alumina, low cement castable that can be vibration cast, pumped, or shotcreted. QUIKTURN 65 PCA has excellent strength and resistance to molten aluminum. After the initial set, this castable can be heated without using the traditional ramp-and-hold heatup schedule. Refer to the recommended QUIKTURN heatup schedule for initial heatup.
Low Cement Castable

Quikturn 65PCA CoarseArrow icon

QUIKTURN 65 PCA COARSE is an aluminum-resistant, coarse aggregate-containing, 60% alumina, low cement castable that can be vibration cast, pumped, or shotcreted. QUIKTURN 65 PCA COARSE has excellent strength and resistance to molten aluminum. After the initial set, this castable can be heated without using the traditional ramp-and-hold heatup schedule. Refer to the recommended QUIKTURN heatup schedule for initial heatup.
PDS SDS
QUIKTURN 65 PCA COARSE is an aluminum-resistant, coarse aggregate-containing, 60% alumina, low cement castable that can be vibration cast, pumped, or shotcreted. QUIKTURN 65 PCA COARSE has excellent strength and resistance to molten aluminum. After the initial set, this castable can be heated without using the traditional ramp-and-hold heatup schedule. Refer to the recommended QUIKTURN heatup schedule for initial heatup.
Alumina Brick

Rescal 80 BPArrow icon

Burned, phosphate-bonded alumina brick
PDS SDS
Burned, phosphate-bonded alumina brick
Alumina Brick

Rescal 85 BPArrow icon

Phosphate-bonded high alumina brick
PDS SDS
Phosphate-bonded high alumina brick
Alumina Brick

Rescal B80PCArrow icon

High alumina, high strength brick
PDS SDS
High alumina, high strength brick
Chemically Bonded Castables

Rescobond 3000AArrow icon

RESCOBOND 3000A is a chemically-bonded, air-setting, single component, high alumina refractory castable formulated for molten aluminum contact applications. This product bonds to existing refractory and can be used in a variety of different applications including patching. To use, mix RESCOBOND 3000A with water and cast. It develops a quick set and can be heated shortly after installation
PDS SDS
RESCOBOND 3000A is a chemically-bonded, air-setting, single component, high alumina refractory castable formulated for molten aluminum contact applications. This product bonds to existing refractory and can be used in a variety of different applications including patching. To use, mix RESCOBOND 3000A with water and cast. It develops a quick set and can be heated shortly after installation
Chemically Bonded Castables

Rescobond 3000A (UK)Arrow icon

RESCOBOND 3000A is a chemically-bonded, air-setting, single component, high alumina refractory castable formulated for molten aluminum contact applications. This product bonds to existing refractory and can be used in a variety of different applications including patching. To use, mix RESCOBOND 3000A with water and cast. It develops a quick set and can be heated shortly after installation
PDS SDS
RESCOBOND 3000A is a chemically-bonded, air-setting, single component, high alumina refractory castable formulated for molten aluminum contact applications. This product bonds to existing refractory and can be used in a variety of different applications including patching. To use, mix RESCOBOND 3000A with water and cast. It develops a quick set and can be heated shortly after installation
Chemically Bonded Castables

Rescobond 3000AGArrow icon

RESCOBOND 3000A G is an aluminum-resistant, phosphate bonded gun mix that can be installed by conventional gunning and handpacking methods. This product has been formulated to be a single component gun mix that can be gunned in hot or cold applications and develops a quick set. No predampening is needed prior to gunning. After the intial set, this product can be heated without using the traditional ramp-and-hold heatup schedule
PDS SDS
RESCOBOND 3000A G is an aluminum-resistant, phosphate bonded gun mix that can be installed by conventional gunning and handpacking methods. This product has been formulated to be a single component gun mix that can be gunned in hot or cold applications and develops a quick set. No predampening is needed prior to gunning. After the intial set, this product can be heated without using the traditional ramp-and-hold heatup schedule
Chemically Bonded Castables

Rescobond 70AGArrow icon

RESCOBOND 70AG is a chemically-bonded, single component gunning mix formulated for molten aluminum maintenance applications. This product can be installed by conventional gunning and handpacking methods and bonds to existing refractory. When gunning, predampening is NOT suggested for this gun mix. This product develops a quick set and can be heated shortly after installation. RESCOBOND 70AG should NOT be installed by vibration casting methods.
PDS SDS
RESCOBOND 70AG is a chemically-bonded, single component gunning mix formulated for molten aluminum maintenance applications. This product can be installed by conventional gunning and handpacking methods and bonds to existing refractory. When gunning, predampening is NOT suggested for this gun mix. This product develops a quick set and can be heated shortly after installation. RESCOBOND 70AG should NOT be installed by vibration casting methods.
Chemically Bonded Castables

Rescobond 90AArrow icon

RESCOBOND 90A is a chemically-bonded, air-setting, single component, high purity alumina refractory castable formulated for molten aluminum contact applications. This product bonds to existing refractory and can be used in a variety of different applications including patching. To use, mix RESCOBOND 90A with water and cast. It develops a quick set and can be heated shortly after installation.
PDS SDS
RESCOBOND 90A is a chemically-bonded, air-setting, single component, high purity alumina refractory castable formulated for molten aluminum contact applications. This product bonds to existing refractory and can be used in a variety of different applications including patching. To use, mix RESCOBOND 90A with water and cast. It develops a quick set and can be heated shortly after installation.
Chemically Bonded Castables

Rescobond 90A GArrow icon

RESCOBOND 90A G is an aluminum-resistant, phosphate bonded gun mix that can be installed by conventional gunning and handpacking methods. This product has been formulated to be a single component gun mix that can be gunned in hot or cold applications and develops a quick set. No predampening is needed prior to gunning. After the intial set, this product can be heated without using the traditional ramp-and-hold heatup schedule.
PDS SDS
RESCOBOND 90A G is an aluminum-resistant, phosphate bonded gun mix that can be installed by conventional gunning and handpacking methods. This product has been formulated to be a single component gun mix that can be gunned in hot or cold applications and develops a quick set. No predampening is needed prior to gunning. After the intial set, this product can be heated without using the traditional ramp-and-hold heatup schedule.
Low Cement Castable

SUREFLOW 60DC (UK)Arrow icon

SUREFLOW 60DC is a 60% Alumina, Mullite based, Self flowing low cement castable. This product is recommended for Pre-cast Shapes or new and full lining repairs using anchored construction. SUREFLOW 60DC has good strength, thermal shock and abrasion resistance.
PDS SDS
SUREFLOW 60DC is a 60% Alumina, Mullite based, Self flowing low cement castable. This product is recommended for Pre-cast Shapes or new and full lining repairs using anchored construction. SUREFLOW 60DC has good strength, thermal shock and abrasion resistance.
Low Cement Castable

SUREFLOW 80ALR (UK)Arrow icon

SUREFLOW 80ALR is a 80% Alumina, Bauxite based castable designed for Aluminium Contact areas such as Melting and Holding furnace Hearths and lower side walls. SUREFLOW 80ALR has excellent strength, alkali and abrasion resistance. It is non-wetting to Aluminium and its alloys at all typical melt temperatures. SUREFLOW 80ALR is designed for installation by pouring with no vibration.
PDS SDS
SUREFLOW 80ALR is a 80% Alumina, Bauxite based castable designed for Aluminium Contact areas such as Melting and Holding furnace Hearths and lower side walls. SUREFLOW 80ALR has excellent strength, alkali and abrasion resistance. It is non-wetting to Aluminium and its alloys at all typical melt temperatures. SUREFLOW 80ALR is designed for installation by pouring with no vibration.