Waste To Energy Refractories - Resco Products

Waste-To-Energy (Refuse)

Waste to energy (refuse) is the process in which garbage is recycled to make energy. This requires special material and maintenance to meet industry requirements. Refuse systems use mechanical methods to shred municipal solid waste separating the materials between combustible or non-combustible. Resco’s products and precast shapes will help you meet those requirements. Our products are designed to increase efficiency and decrease costs. Resco’s products provide the thermal and abrasion resistance needed and the ability to withstand alkali and chemical attacks. Municipal solid waste, garbage, is burned at a waste-to-energy plant to create energy through steam. Some facilities also burn waste to reduce the amount of garbage the volume entering into landfills.

Refractories for Waste-To-Energy (Refuse) Industry

Resco provides products for the primary and secondary burn chambers as well as additional products as needed. Our Resco waste incineration specialist will evaluate your procedure and conditions to recommend the best products for your unique processes.

Waste to enegery Image

RELATED PRODUCTS
Low Cement Castable

EZ Cubed Fine 80 SiCArrow icon

Fine grained/shotcretable/sic containing/low cement castable
Fine grained/shotcretable/sic containing/low cement castable
Low Cement Castable

ProGun LC 50GArrow icon

ProGun LC 50G is a 3000oF low-cement gun mix. This product is designed to give excellent gunnability, low porosity, minimum linear change, and high fired strengths.
ProGun LC 50G is a 3000oF low-cement gun mix. This product is designed to give excellent gunnability, low porosity, minimum linear change, and high fired strengths.
Low Cement Castable

ProGun LC 80SCGArrow icon

ProGun LC 80SCG is an 80% SiC castable that uses low cement binder technology with the gunite installation method. Its low porosity, excellent abrasion resistance and high heat transfer value make this product an excellent choice for the tube walls in the combustion zones of power generating units. The high heat transfer characteristic of the SiC reduces surface slagging and alkali build-up, thereby, improving the operating efficiency of your unit.
ProGun LC 80SCG is an 80% SiC castable that uses low cement binder technology with the gunite installation method. Its low porosity, excellent abrasion resistance and high heat transfer value make this product an excellent choice for the tube walls in the combustion zones of power generating units. The high heat transfer characteristic of the SiC reduces surface slagging and alkali build-up, thereby, improving the operating efficiency of your unit.
Conventional Castable

Rescocast 15GMArrow icon

RESCOCAST 15GM is a 2600°F general duty castable that can be installed by vibration casting methods. It is designed for refractory use in powerplant ash-hopper applications as well as other applications where high strength, moderate abrasion resistance, and medium insulating values are required. RESCOCAST 15GM is also an excellent gunning product that can be troweled too.
RESCOCAST 15GM is a 2600°F general duty castable that can be installed by vibration casting methods. It is designed for refractory use in powerplant ash-hopper applications as well as other applications where high strength, moderate abrasion resistance, and medium insulating values are required. RESCOCAST 15GM is also an excellent gunning product that can be troweled too.