Non-Ferrous Metals Refractories
Resco Products has been providing the non-ferrous metals industry the high-quality products necessary for consistent production. Resco understands that each metal reacts differently and that no process is identical.
With a melting point well above 4,000°F, refractories with high levels of corrosion, oxidation, and chemical resistance. Producing the cleanest metals is extremely important and Resco creates a customized refractory solution that fits your application.
Non-Ferrous Metals Refractories
Resco offers non-ferrous metals refractories including monolithics/castables. Ranging from high alumina castables for induction furnace to basic gun mixes and castables for maintenance of smelting furnaces.
Resco Product non-ferrous metals representative acts as an extension of your team looking out for your best interest. Resco has developed unique solutions for each application assisting customers in reducing downtime and increasing production by streamlining workflows.
Resco Products creates optimized workflows for each customer to establish an optimized delivery schedule. Resco keeps the select products in stock for unexpected demand. We understand what is important to you.
RELATED PRODUCTS
Dry Mortar
Alutab
Alutab
ALUTAB® is a high purity, 85% alumina mortar compatible with 70%, 80%, and 90% alumina brick. It is designed for use under the most severe conditions where high refractoriness, good bond strength, and resistance to attack by molten metal and slag are the prime requirements. It is air-setting with a 3400°F service temperature limit.
ALUTAB® is a high purity, 85% alumina mortar compatible with 70%, 80%, and 90% alumina brick. It is designed for use under the most severe conditions where high refractoriness, good bond strength, and resistance to attack by molten metal and slag are the prime requirements. It is air-setting with a 3400°F service temperature limit.
Insulating Castable
Castable #16
Castable #16
CASTABLE #16 is an ultra-lightweight refractory concrete with a service limit of 1600oF as a hot face material and 1800oF as a backup insulation. CASTABLE #16 has a good strength to weight ratio and can replace block insulation for many applications. The most useful property is the very low K-factor.
CASTABLE #16 is an ultra-lightweight refractory concrete with a service limit of 1600oF as a hot face material and 1800oF as a backup insulation. CASTABLE #16 has a good strength to weight ratio and can replace block insulation for many applications. The most useful property is the very low K-factor.
Basic Monolithics
CP-40 Castable
CP-40 Castable
Chrome Magnesite Castable that can be cast or rammed
Magnesia Brick
CRB-20
CRB-20
Burned, Fused Grain, Chrome Magnesite Brick, Mag Chrome, Mag-Chrome
Low Cement Castable
EZ Cast 3400
EZ Cast 3400
EZ CAST® 3400 is a self-flowing, 99% alumina, low cement castable for applications up to 3400°F. It has low porosity and low permeability without a sacrifice in thermal shock resistance. This product is not recommended for pumping.
Low Cement Castable
EZ Cast 34-10
EZ Cast 34-10
EZ CAST® 34-10 is a high purity, cement-bonded, alumina-chrome castable that contains 10% chromic oxide. This castable can be used in severe slagging conditions and high temperatures. EZ CAST® 34-10 can be installed using vibration casting, pumping, and shotcreting methods. When shotcreting, RESCO SC-1 is the recommended shotcrete activator.
EZ CAST® 34-10 is a high purity, cement-bonded, alumina-chrome castable that contains 10% chromic oxide. This castable can be used in severe slagging conditions and high temperatures. EZ CAST® 34-10 can be installed using vibration casting, pumping, and shotcreting methods. When shotcreting, RESCO SC-1 is the recommended shotcrete activator.
Low Cement Castable
EZ Cubed 56SCPC
EZ Cubed 56SCPC
EZ CUBED® 56SCPC is a Low Cement, Silicon Carbide-based castable. This product can be installed by vibration cast, pumping or shotcreting methods.
Dry Mortar
GRFG Mortar
GRFG Mortar
GRFG MORTAR is a dry, air-setting basic mortar containing fused magnesia-chrome aggregate and can be applied by troweling or dipping consistencies. This basic mortar features excellent resistance to aggressive basic slags.
Low Cement Castable
Kricon 32
Kricon 32
KRICON® 32 is designed for service temperatures up to 3200°F. It is a high alumina, low iron castable with excellent hot modulus of rupture strengths.
Low Cement Castable
Kricon 32-70
Kricon 32-70
KRICON® 32-70 is a 77% alumina, low iron castable with a 3200°F temperature limit. It offers improved slag resistance and positive reheat expansion at steel making temperatures to insure tight, crack-free linings in cast ladles and tundishes.
Low Cement Castable
Kricon 34
Kricon 34
KRICON® 34 is designed for service temperatures up to 3400°F. It is an extra high alumina castable featuring low porosity and low permeability while maintaining good thermal shock resistance. This mix is very pure at 99% alumina with a very low content of total impurities.
Low Cement Castable
Kricon 34-10
Kricon 34-10
KRICON® 34-10 is a chromia-containing, tabular alumina-based castable. The 10% chromia addition makes this low cement product ideal for high wear areas attacked by slags by improving volume stability and reducing the tendency for the formation of shrinkage cracks at very high temperatures. It can be used in steel, copper, and other applications requiring excellent corrosion resistance. This castable should be installed using vibration casting methods.
KRICON® 34-10 is a chromia-containing, tabular alumina-based castable. The 10% chromia addition makes this low cement product ideal for high wear areas attacked by slags by improving volume stability and reducing the tendency for the formation of shrinkage cracks at very high temperatures. It can be used in steel, copper, and other applications requiring excellent corrosion resistance. This castable should be installed using vibration casting methods.
Low Cement Castable
Kricon 34-5
Kricon 34-5
KRICON® 34-5 is a chromia-containing, tabular alumina-based castable. The 5% chromia addition makes this low cement product ideal for high wear areas attacked by slags by improving volume stability and reducing the tendency for the formation of shrinkage cracks at very high temperatures. It can be used in steel, copper, and other applications requiring excellent corrosion resistance.
KRICON® 34-5 is a chromia-containing, tabular alumina-based castable. The 5% chromia addition makes this low cement product ideal for high wear areas attacked by slags by improving volume stability and reducing the tendency for the formation of shrinkage cracks at very high temperatures. It can be used in steel, copper, and other applications requiring excellent corrosion resistance.
Low Cement Castable
Kricon CCM-30
Kricon CCM-30
KRICON® CCM 30 is a high purity chromia-containing, tabular alumina-based castable. The 30% chromia addition makes this low cement product ideal for high wear areas attacked by slags by improving volume stability and reducing the tendency for the formation of shrinkage cracks at very high temperatures. This castable should be installed using vibration casting methods.
KRICON® CCM 30 is a high purity chromia-containing, tabular alumina-based castable. The 30% chromia addition makes this low cement product ideal for high wear areas attacked by slags by improving volume stability and reducing the tendency for the formation of shrinkage cracks at very high temperatures. This castable should be installed using vibration casting methods.
Dry Mortar
Larcobond
Larcobond
A volume stable refractory mortar with good water retention and workability. Suitable for dipping or troweling.
Wet Mortar
Larcobond AS
Larcobond AS
LARCOBOND AS is an dry, air-setting chrome mortar that has good workability and water retention. This mortar is suitable for dipping and trowelling
Alumina Brick
Lo-Sil Super
Lo-Sil Super
Special high alumina brick for aluminum contact
Pressed Shape
N-1
N-1
A non-wetting, non-deforming, erosion resistant nozzle for steel casting.
Pressed Shape
N-2
N-2
This material is formed into highly refractory non-deforming nozzles which resist erosion and retard non-metallic inclusions. This gives good stream control by maintaining the original flow hole diameter.
Pressed Shape
N2-62
N2-62
This material is formed into highly refractory non-deforming nozzles which resist erosion and retard non-metallic inclusions. This gives good stream control by maintaining the original flow hole diameter.
This material is formed into highly refractory non-deforming nozzles which resist erosion and retard non-metallic inclusions. This gives good stream control by maintaining the original flow hole diameter.
Basic Monolithics
PermaCast FG Ram Cast
PermaCast FG Ram Cast
PermaCast™FG is a low silica, volume stable, magnesia-chrome ramming mix highly resistant to basic slags. It is produced from fused magnesia-chrome grain and is recommended for a wide variety of high temperature applications which require excellent corrosion resistance. Product maintains its high strength throughout a wide temperature range.
PermaCast™FG is a low silica, volume stable, magnesia-chrome ramming mix highly resistant to basic slags. It is produced from fused magnesia-chrome grain and is recommended for a wide variety of high temperature applications which require excellent corrosion resistance. Product maintains its high strength throughout a wide temperature range.
Basic Monolithics
PermaCast FG-GM
PermaCast FG-GM
PermaCast™FG-GM is a low silica, volume stable, magnesia-chrome gunning mix highly resistant to basic slags. It is produced from fused magnesia-chrome grain and is recommended for a wide variety of high temperature applications which require excellent corrosion resistance. Product maintains its high strength throughout a wide temperature range. Sizing and bonding system designed for minimum rebound when applied through nozzle mix gunning equipment.
PermaCast™FG-GM is a low silica, volume stable, magnesia-chrome gunning mix highly resistant to basic slags. It is produced from fused magnesia-chrome grain and is recommended for a wide variety of high temperature applications which require excellent corrosion resistance. Product maintains its high strength throughout a wide temperature range. Sizing and bonding system designed for minimum rebound when applied through nozzle mix gunning equipment.
Basic Monolithics
PermaCast FG-GM DS
PermaCast FG-GM DS
PERMANENTE FG-GM DS is a dust suppressed, basic gunning mix containing a fused magnesia-chrome grain and is formulated for use against aggressive basic slags. This product is installed by conventional gunning only.
Basic Monolithics
PermaCast FG-HS
PermaCast FG-HS
PermaCast™FG-HS is a volume stable, magnesia-chrome ramming mix highly resistant to basic slags. It is produced from fused magnesia-chrome grain and is recommended for a wide variety of high temperature applications which require excellent corrosion resistance. Product maintains its strength throughout a wide temperature range.
PermaCast™FG-HS is a volume stable, magnesia-chrome ramming mix highly resistant to basic slags. It is produced from fused magnesia-chrome grain and is recommended for a wide variety of high temperature applications which require excellent corrosion resistance. Product maintains its strength throughout a wide temperature range.
Low Cement Castable
Permacon 95
Permacon 95
PERMACON® 95 is an ultra-low cement, 95% alumina castable, designed for severe service conditions at temperatures up to 3300°F. It offers superior resistance to spalling, cracking, impact, and abrasion; and greater resistance to chemical attack than low cement or conventional castables.
Low Cement Castable
Quikturn 32-70
Quikturn 32-70
QUIKTURN 32-70 is a low cement, 70% alumina castable that can be installed by vibration cast methods only. After the final set, this unique castable can be heated without the traditional ramp-and-hold heatup schedule. Refer to the recommended QUIKTURN heatup schedule for the initial heatup.
Low Cement Castable
Quikturn 32-70PC
Quikturn 32-70PC
QUIKTURN 32-70 PC is a low cement, 70% alumina castable that can be installed by vibration cast, pumping, and shotcreting methods. After the final set, this unique castable can be heated without the traditional ramp-and-hold heatup schedule. Refer to the recommended QUIKTURN heatup schedule for the initial heatup.
QUIKTURN 32-70 PC is a low cement, 70% alumina castable that can be installed by vibration cast, pumping, and shotcreting methods. After the final set, this unique castable can be heated without the traditional ramp-and-hold heatup schedule. Refer to the recommended QUIKTURN heatup schedule for the initial heatup.
Low Cement Castable
Ref Cast 90FS LC
Ref Cast 90FS LC
A low cement, fused silica based castable of exceptional purity, high strength and very good dimensional stability. It has unique resistance to thermal shock and spalling, as well as to most acid slags.
Alumina Brick
Rescal 10 CRSR
Rescal 10 CRSR
Burned, shock resistant, alumina chrome brick
Alumina Brick
Rescal 85 B
Rescal 85 B
High alumina, high strength brick
Plastic
Resco Tappers Clay
Resco Tappers Clay
RESCO TAPPERS CLAY is a heat set, clay-based mix for tapholes that is used primarily in the nickel and copper smelters.
Magnesia Brick
Rescomag HF
Rescomag HF
Magnesia-alumina spinel brick
Alumina Brick
Seneca 80XD
Seneca 80XD
Burned, high alumina brick
Pre-Cast Shapes
Uniform 80-15SC 4%304
Uniform 80-15SC 4%304
Pre-Cast Shapes
Uniform V 70-15SCPC 1.5%HCA
Uniform V 70-15SCPC 1.5%HCA
Low Cement Castable
Vibrocast 50
Vibrocast 50
VIBROCAST 50 is a Low Cement, 45% Alumina castable that can be installed by vibration cast methods only.
Low Cement Castable
Vibrocast 50 (UK)
Vibrocast 50 (UK)
VIBROCAST 50 is a Low Cement, 45% Alumina castable that can be installed by vibration cast methods only.
Low Cement Castable
Vibrocast 70-15 SCPC
Vibrocast 70-15 SCPC
VIBROCAST 70/15SCPC is a pumpable, low-cement 70% alumina castable that contains 15% silicon carbide, which is designed to give minimum porosity and linear change with maximum density and good strengths. This material will withstand the severe high temperature corrosion and erosion that are common in today’s Metals Industry. This product can be installed by vibration casting and pumpcasting methods.
VIBROCAST 70/15SCPC is a pumpable, low-cement 70% alumina castable that contains 15% silicon carbide, which is designed to give minimum porosity and linear change with maximum density and good strengths. This material will withstand the severe high temperature corrosion and erosion that are common in today’s Metals Industry. This product can be installed by vibration casting and pumpcasting methods.
Low Cement Castable
Vibrocast 70M
Vibrocast 70M
VIBROCAST 70M is an economical, low cement 70% alumina with good cast density and high strengths formulated to withstand high temperatures. This product should be installed by vibration casting methods only.
Get a Quote