Ferro Alloy
Resco Products is a leader in refractory products for the ferroalloy industry. Resco provides the complete refractory solution for blast furnace, electric arc furnace, and more. Resco has a proven track record within the industry. Resco provides high-quality industry-standard products as well as fully customized solutions to prevent extended downtime and equipment failure. Your specialist will evaluate your procedures and conditions to make the most informed recommendations.
For the Ferro Alloy application Resco Products commonly sells Rescal 70D, Dura-Tab, Guidon LS, & Seneca 85.
RELATED PRODUCTS
Caulk
22 Caulk
22 CAULK is ideal for filling joints and cracks in refractory linings. Job site mixing is not needed. Just snip-off the tip of the ready-to-use caulking tube and apply the moist material using a hand or air powered caulking gun. Heat loss through joints and cracks will be reduced. Fine particles will not accumulate in those openings, preventing further damage to the lining. The surface of 22 CAULK will harden when exposed to air.
22 CAULK is ideal for filling joints and cracks in refractory linings. Job site mixing is not needed. Just snip-off the tip of the ready-to-use caulking tube and apply the moist material using a hand or air powered caulking gun. Heat loss through joints and cracks will be reduced. Fine particles will not accumulate in those openings, preventing further damage to the lining. The surface of 22 CAULK will harden when exposed to air.
Caulk
22 Caulk (UK)
22 CAULK is ideal for filling joints and cracks in refractory linings. Job site mixing is not needed. Just snip-off the tip of the ready-to-use caulking tube and apply the moist material using a hand or air powered caulking gun. Heat loss through joints and cracks will be reduced. Fine particles will not accumulate in those openings, preventing further damage to the lining. The surface of 22 CAULK will harden when exposed to air.
22 CAULK is ideal for filling joints and cracks in refractory linings. Job site mixing is not needed. Just snip-off the tip of the ready-to-use caulking tube and apply the moist material using a hand or air powered caulking gun. Heat loss through joints and cracks will be reduced. Fine particles will not accumulate in those openings, preventing further damage to the lining. The surface of 22 CAULK will harden when exposed to air.
Wet Mortar
Adacor 70 Dip
ADACOR 70 is a wet ready-mixed high alumina based bonding mortar available in either trowel or dipping consistencies. ADACOR 70 is recommended for laying up super duty, high alumina, and mullite brick. It has a high alumina content which gives the product resistance to erosion and also a high bonding strength at temperatures up to 3200°F.
ADACOR 70 is a wet ready-mixed high alumina based bonding mortar available in either trowel or dipping consistencies. ADACOR 70 is recommended for laying up super duty, high alumina, and mullite brick. It has a high alumina content which gives the product resistance to erosion and also a high bonding strength at temperatures up to 3200°F.
Wet Mortar
Adacor 70 TR-D3.5
ADACOR 70 is a wet ready-mixed high alumina based bonding mortar available in either trowel or dipping consistencies. ADACOR 70 is recommended for laying up super duty, high alumina, and mullite brick. It has a high alumina content which gives the product resistance to erosion and also a high bonding strength at temperatures up to 3200°F.
ADACOR 70 is a wet ready-mixed high alumina based bonding mortar available in either trowel or dipping consistencies. ADACOR 70 is recommended for laying up super duty, high alumina, and mullite brick. It has a high alumina content which gives the product resistance to erosion and also a high bonding strength at temperatures up to 3200°F.
Wet Mortar
Adacor 80 Dip
ADACOR 80 is a wet ready-mixed high alumina based bonding mortar available in either trowel or dipping consistencies. ADACOR 80 is recommended for laying up super duty, high alumina, and mullite brick. It has a high alumina content which gives the product resistance to erosion and also a high bonding strength at temperatures up to 3200°F.
ADACOR 80 is a wet ready-mixed high alumina based bonding mortar available in either trowel or dipping consistencies. ADACOR 80 is recommended for laying up super duty, high alumina, and mullite brick. It has a high alumina content which gives the product resistance to erosion and also a high bonding strength at temperatures up to 3200°F.
Wet Mortar
Adacor 80 TR-D3.5
ADACOR 80 is a wet ready-mixed high alumina based bonding mortar available in either trowel or dipping consistencies. ADACOR 80 is recommended for laying up super duty, high alumina, and mullite brick. It has a high alumina content which gives the product resistance to erosion and also a high bonding strength at temperatures up to 3200°F.
ADACOR 80 is a wet ready-mixed high alumina based bonding mortar available in either trowel or dipping consistencies. ADACOR 80 is recommended for laying up super duty, high alumina, and mullite brick. It has a high alumina content which gives the product resistance to erosion and also a high bonding strength at temperatures up to 3200°F.
Wet Mortar
Adaphos 85 Dip
ADAPHOS 85 is a wet ready-mixed high alumina bonding mortar with a chemical bonding system. With the unique bonding system, a high bonding strength is developed at lower temperatures (300-600°F) and the high bonding strength continues until a ceramic bonding occurs. ADAPHOS 85 is primarily used to lay up high alumina brick in ladles and is available in both trowelling and dipping consistencies. It is used in areas where severe service conditions require increased refractoriness to corrosion/erosion from slags.
ADAPHOS 85 is a wet ready-mixed high alumina bonding mortar with a chemical bonding system. With the unique bonding system, a high bonding strength is developed at lower temperatures (300-600°F) and the high bonding strength continues until a ceramic bonding occurs. ADAPHOS 85 is primarily used to lay up high alumina brick in ladles and is available in both trowelling and dipping consistencies. It is used in areas where severe service conditions require increased refractoriness to corrosion/erosion from slags.
Wet Mortar
Adaphos 85 TR-D3
ADAPHOS 85 is a wet ready-mixed high alumina bonding mortar with a chemical bonding system. With the unique bonding system, a high bonding strength is developed at lower temperatures (300-600°F) and the high bonding strength continues until a ceramic bonding occurs. ADAPHOS 85 is primarily used to lay up high alumina brick in ladles and is available in both trowelling and dipping consistencies. It is used in areas where severe service conditions require increased refractoriness to corrosion/erosion from slags.
ADAPHOS 85 is a wet ready-mixed high alumina bonding mortar with a chemical bonding system. With the unique bonding system, a high bonding strength is developed at lower temperatures (300-600°F) and the high bonding strength continues until a ceramic bonding occurs. ADAPHOS 85 is primarily used to lay up high alumina brick in ladles and is available in both trowelling and dipping consistencies. It is used in areas where severe service conditions require increased refractoriness to corrosion/erosion from slags.
Alumina Brick
Alumex P-85-HS
ALUMEX® P-85 HS exhibits a combination of very high strengths, high abrasion resistance, and excellent thermal shock resistance. Its high purity composition yields a refractory product that can withstand severe alkali attack.
Dry Mortar
Alutab
ALUTAB® is a high purity, 85% alumina mortar compatible with 70%, 80%, and 90% alumina brick. It is designed for use under the most severe conditions where high refractoriness, good bond strength, and resistance to attack by molten metal and slag are the prime requirements. It is air-setting with a 3400°F service temperature limit.
ALUTAB® is a high purity, 85% alumina mortar compatible with 70%, 80%, and 90% alumina brick. It is designed for use under the most severe conditions where high refractoriness, good bond strength, and resistance to attack by molten metal and slag are the prime requirements. It is air-setting with a 3400°F service temperature limit.
Pressed Shape
C-4
Highly refractory material used in the continuous casting process for making metal railroad wheels. It is non-wetting for ferrous metals.
Kiln Furnitures
Cordierite Mix 05-05
A high strength, thermal shock resistant, pressed cordierite mix suited for kiln furniture requirements
Plastic
Corline
CORLINE® was designed for linings exposed to extreme erosion environments in heat enclosures of the oil refining, petrochemical, gas processing and solid fuels processing industries. CORLINE® is a High Alumina, Chemically Bonded, Erosion Resistant Refractory.
RAM
Corpatch 80 MS
CORPATCH® 80-MS is an 80% alumina patching mix. It is an all purpose patching mix that is tough enough to be one of the best erosion or abrasion resistant refractory lining materials available today, yet it is pliable enough to be installed and shaped by hand or mallet.
Alumina Brick
DuraLite 70 G
Burned High Alumina Brick
Alumina Brick
DuraLite 80 G
High Alumina Brick
Alumina Brick
DuraLite 85 G
High Alumina Brick
Low Cement Castable
EZ Cubed 70PC
EZ CUBED® 70PC is a Low Cement, 70% Alumina castable that can be installed by vibration cast, pumping or shotcreting methods.
Low Cement Castable
EZ Cubed 80-15
EZ CUBED® 80-15 is a Low Cement, 80% Alumina castable containing a silicon carbide addition that can be installed by vibration cast, self-flowing, pumping or shotcreting methods.
Ultra Low Cement
FERMET 70 (UK)
Fermet 70 is a corundum / andalusite based ultra low cement castable with good resistance to slags found in the ferrosilicon industry.
Fermet 70 is a corundum / andalusite based ultra low cement castable with good resistance to slags found in the ferrosilicon industry.
Ultra Low Cement
FERMET 70SF (UK)
Fermet 70SF is a self flowing corundum/mullite based ultra low cement castable with low titanium oxide and phosphate levels. It has excellant resistance to slags found in the silicon metal and ferrosilicon industries.
Wet Mortar
Ladlelock 3000 Dip
LADLELOCK 3000 is a Premium, Air-Setting, Superduty Mortar and is available in Premixed, Troweling and Dipping consistencies
Wet Mortar
Ladlelock 3000 GU-TR-D3.5
LADLELOCK 3000 is a Premium, Air-Setting, Superduty Mortar and is available in Premixed, Troweling and Dipping consistencies
Wet Mortar
Ladlelock 3000 GU-TR-W-D3.5
LADLELOCK 3000 is a Premium, Air-Setting, Superduty Mortar and is available in Premixed, Troweling and Dipping consistencies
Wet Mortar
Ladlelock 3000 NW-TR-D2.5
LADLELOCK 3000 is a Premium, Air-Setting, Superduty Mortar and is available in Premixed, Troweling and Dipping consistencies
Wet Mortar
Ladlelock 3000 NW-TR-W-2.5
LADLELOCK 3000 is a Premium, Air-Setting, Superduty Mortar and is available in Premixed, Troweling and Dipping consistencies
Wet Mortar
Ladlelock 3000 TF-TR-D3
LADLELOCK 3000 TF is an Premium, Air-Setting, Superduty Mortar and is available in a premixed, Troweling consistency.
Wet Mortar
Ladlelock 3000 TR-D2
LADLELOCK 3000 is a Premium, Air-Setting, Superduty Mortar and is available in Premixed, Troweling and Dipping consistencies
Wet Mortar
Ladlelock 3000 TR-D2.5
LADLELOCK 3000 is a Premium, Air-Setting, Superduty Mortar and is available in Premixed, Troweling and Dipping consistencies
Wet Mortar
Ladlelock 3000 TR-W-D2.5
LADLELOCK 3000 is a Premium, Air-Setting, Superduty Mortar and is available in Premixed, Troweling and Dipping consistencies
Wet Mortar
Ladlelock 85 Dip
LADLELOCK 85 is a high alumina, premixed, air setting mortar. LADLELOCK 85 is available in standard and Winterized versions, and dipping or trowelling consistencies.
Wet Mortar
Ladlelock 85 Dip-W
LADLELOCK 85 is a high alumina, premixed, air setting mortar. LADLELOCK 85 is available in standard and Winterized versions, and dipping or trowelling consistencies.
Wet Mortar
Ladlelock 85 PB-TR-D3
LADLELOCK 85 PB is a Premium, Phosphate-Bonded, 85% Alumina Mortar. This mortar is available in a premixed, trowelling consistency and can be used in a wide variety of mortar applications.
Wet Mortar
Ladlelock 85 PR-TR-D4
LADLELOCK 85 PB is a Premium, Phosphate-Bonded, 85% Alumina Mortar. This mortar is available in a premixed, trowelling consistency and can be used in a wide variety of mortar applications.
Wet Mortar
Ladlelock 85 TR-D3
LADLELOCK 85 is a high alumina, premixed, air setting mortar. LADLELOCK 85 is available in standard and Winterized versions, and dipping or trowelling consistencies.
Wet Mortar
Ladlelock 85 TR-W-D3
LADLELOCK 85 is a high alumina, premixed, air setting mortar. LADLELOCK 85 is available in standard and Winterized versions, and dipping or trowelling consistencies.
Magnesia Brick
Nuline 10-99
Resin bonded, magnesia-carbon brick
Magnesia Brick
Nuline 13 DF
Resin bonded, magnesia-carbon brick
Alumina Brick
Patriot HF
High fired, super duty, carbon monoxide resistant brick
Basic Monolithics
Permanente 165 AF Castable
PERMANENTE® 165-AF is a magnesite-based, basic castable with a unique, nonchromate bonding system and can be installed by vibration casting or ramming methods, to maximize properties.
Basic Monolithics
Permanente 165 AF Ram Mix
PERMANENTE® 165-AF RAM MIX is a fine sized high MgO material intended for leveling ladle bottoms and for backfill behind working linings in ladles, AOD degassers and other metallurgical vessels. It can be rammed or cast.
Dry Mortar
Permanente Mortar
PERMANENTE® MORTAR is a dry, heat setting, high magnesia mortar. This magnesite mortar is designed to lay up basic brick. Ideally suited for use with magnesite or magnesia-carbon brick. This mortar is suggested for working and safety linings in both steel and non-ferrous metals applications.
PERMANENTE® MORTAR is a dry, heat setting, high magnesia mortar. This magnesite mortar is designed to lay up basic brick. Ideally suited for use with magnesite or magnesia-carbon brick. This mortar is suggested for working and safety linings in both steel and non-ferrous metals applications.
Alumina Brick
Rescal 70D
High alumina brick
Alumina Brick
Rescal 85 B
High alumina, high strength brick
Alumina Brick
Rescal 90 XD-G
Burned, high alumina brick
Plastic
Rescoram 10CR
RESCORAM 10 CR is a high alumina, phosphate-bonded plastic with 10% chromic oxide that is used throughout the metals producing industries. Its chemical bond develops high strength at lower temperatures. This property makes it ideal for application where there is insufficient heat to develop the ceramic bond required in heat-setting plastics.
RESCORAM 10 CR is a high alumina, phosphate-bonded plastic with 10% chromic oxide that is used throughout the metals producing industries. Its chemical bond develops high strength at lower temperatures. This property makes it ideal for application where there is insufficient heat to develop the ceramic bond required in heat-setting plastics.
Plastic
Rescoram 20CR
RESCORAM 20CR is a Phosphate-Bonded Alumina-Chrome Plastic that contains 20% chromic oxide, for increased slag and corrosion resistance.
Plastic
Rescoram 70 Blue
RESCORAM 70 BLUE is a mullite, phosphate-bonded plastic material that is used throughout the metals, power, cement, and lime producing industries. Its chemical bond develops high strength at lower temperatures. This property makes it ideal for application where there is insufficient heat to develop the ceramic bond required in heat-setting plastics. This product is designed to resist alkali attack.
RESCORAM 70 BLUE is a mullite, phosphate-bonded plastic material that is used throughout the metals, power, cement, and lime producing industries. Its chemical bond develops high strength at lower temperatures. This property makes it ideal for application where there is insufficient heat to develop the ceramic bond required in heat-setting plastics. This product is designed to resist alkali attack.
Plastic
Rescoram 85S
Phosphate bonded alumina plastic
Plastic
Rescoram 90
RESCORAM 90 is a high alumina, phosphate-bonded plastic material that is used throughout the metals, power, cement, and lime producing industries. Its chemical bond develops high strength at lower temperatures. This property makes it ideal for application where there is insufficient heat to develop the ceramic bond required in heat-setting plastics.
RESCORAM 90 is a high alumina, phosphate-bonded plastic material that is used throughout the metals, power, cement, and lime producing industries. Its chemical bond develops high strength at lower temperatures. This property makes it ideal for application where there is insufficient heat to develop the ceramic bond required in heat-setting plastics.
Conventional Castable
Sakonite
SAKONITE® is a very economical refractory concrete. Although its maximum service temperature is 2200°F, it is designed primarily for service between 70°F and 1000°F. It is widely used for cast floors exposed to molten metals or hot ingots. It can be cast or pumped and finished like ordinary concrete. It may also be rammed or cast-vibrated for increased density and strength with minimum shrinkage. SAKONITE® is also available as GC SAKONITE® gun mix.
SAKONITE® is a very economical refractory concrete. Although its maximum service temperature is 2200°F, it is designed primarily for service between 70°F and 1000°F. It is widely used for cast floors exposed to molten metals or hot ingots. It can be cast or pumped and finished like ordinary concrete. It may also be rammed or cast-vibrated for increased density and strength with minimum shrinkage. SAKONITE® is also available as GC SAKONITE® gun mix.
Low Cement Castable
Unicrete 60 Flowz
UNICRETE 60 FLOWZ is a self-flow, shotcretable, low cement castable. The properties of low cement castables are sensitive to the amount of mixing water used during casting. The best physical properties are achieved when mixing water is kept to a minimum, the material is mixed thoroughly and as much vibration as possible is used when casting.
UNICRETE 60 FLOWZ is a self-flow, shotcretable, low cement castable. The properties of low cement castables are sensitive to the amount of mixing water used during casting. The best physical properties are achieved when mixing water is kept to a minimum, the material is mixed thoroughly and as much vibration as possible is used when casting.
Pre-Cast Shapes
Uniform 65LC
UNIFORM 65 LC is a precast shape made with a high strength, low moisture castable based on hard fired alumina/silica aggregate. UNIFORM 65 LC is designed for maximum resistance to abrasion and erosion.
Pre-Cast Shapes
Uniform 70 UCXC
UNIFORM 70 UCXC is a coarse grain-containing, ultralow cement, 70% alumina precast shape. This precast mix features excellent dimensional stability, strength, and corrosion resistance and is available with stainless steel fibers for additional strength and spall resistance.
Pre-Cast Shapes
Uniform 85LCXC
UNIFORM 85 LCXC is a precast shape made with an Coarse Grain-containing 85% Alumina, Low Cement Castable. For added strength and spalling resistance, UNIFORM 85 LCXC is available with stainless steel fiber additions.
Pre-Cast Shapes
Uniform 90ARS
Uniform 90 ARS is a precast shape made with a tabular alumina / spinel, low moisture castable. The addition of spinel significantly improves this castables hot strength and resistance to slag attack.