Refractory Products

CORPATCH® 50-MS is an 50% alumina patching mix. It is an all purpose patching mix that is tough enough to be one of the best erosion or abrasion resistant refractory lining materials available today, yet it is pliable enough to be installed and shaped by hand or mallet.

CORPATCH® 80 is an 80% alumina patching mix. It is an all purpose patching mix that is tough enough to be one of the best erosion or abrasion resistant refractory lining materials available today, yet it is pliable enough to be installed and shaped by hand or mallet.

CORPATCH® 80-MS is an 80% alumina patching mix. It is an all purpose patching mix that is tough enough to be one of the best erosion or abrasion resistant refractory lining materials available today, yet it is pliable enough to be installed and shaped by hand or mallet.

Denspak is a tempered ramming mix formulated with high purity chrome sands. Denspak can be used for applications such as maintenance of electric furnace

Denspak O is a tempered ramming mix formulated with high purity Olivine sands. Denspak O can be used for electric furnace runners.

DOL-MIX-R+ is a dolomite-based ram mix with an improved binder system

Rotary kiln sintered dolomite and burnt magnesite grains that are sized and blended with a proprietary mix of nonaqueous organic binders. The organic system provides an intermediate bond until a strong ceramic bond is developed at service temperatures. DOL-MIX-R50+ is primarily used as a high temperature ramming material in plug bottom design ladles and AOD’s, and as a filling ram around well blocks and porous plug blocks.

MAGVIBE 88 N is a basic, heat setting, 88% MgO dry vibratable containing a dead-burned magnesite aggregate. This product is formulated for use as a backup lining in steel ladles.

RESCO's R 50 DV is a Heat-Setting, 45% Alumina, Dry Vibratable Mix that is used primarily in the steel industry. This product is slightly tempered to control dusting. R-50 DV is installed by pneumatic ramming methods.

RESCO's R 60 DV is a Heat-Setting, 60% Alumina, Dry Vibratable Mix that is used primarily in the steel industry. This product is slightly tempered to control dusting. R-60 DV is installed by pneumatic ramming methods.

RESCO's R 85 DV is a Heat-Setting, 80% Alumina, Dry Vibratable Mix that is used primarily in the steel industry. This product is slightly tempered to control dusting. R-85 DV is installed by pneumatic ramming methods.

High Strength Ramming Mix

Fine grain tabular alumina phosphate bonded patch for high strength at low temperatures, with no shrinkage. Provides protection in severe heat and abrasion conditions. Characterized by good workability and ease of installation to warm (220°F) or cool surfaces. Formulation possesses working properties desired by masons.

REF RAM CCMH RM is a ready-to-use, phosphate-bonded, 60% alumina ramming mix that is used primarily in the steel industry. This product is installed by pneumatic ramming methods. Prior to service, material must be properly cured to avoid hazardous conditions. Avoid contact with molten metal until thoroughly dried.

RESCO LR is a phosphate-bonded, 80% alumina, granular ramming mix that is used primarily in the steel industry. This product is installed by pneumatic ramming methods.

A high alumina material designed for hand application to patch hot refractory surfaces. Ideal for patching lances, small ladles, spouts, tundishes and doors. ST-001 can also be used for cold patching. It is ready to use as received.