Refractory Products

AA-22 BRUSH MIX is a material that coating is ideal for strengthening existing refractory lining surfaces. It can be applied up to 1/4” thick providing increased refractory protection without a great loss of volume to your unit. AA-22 BRUSH MIX is supplied wet or dry. however, water can be added to adjust the consistency. It can be applied with a brush, trowel, rubber float, roller, sprayer, etc. It hardens in air and becomes non-hydroscopic when heated to only 250 - 300°F.

RESCOBOND 17G isdesigned for use in U-Bends, Y-Sections, overhead lines, and other catalyst transfer lines. It is a chemically-bonded, air-setting, single component gunning mix. This product can be installed by conventional gunning and handpacking methods and bonds to existing refractory. When gunning, predampening is NOT suggested for this gun mix. This product develops a quick set and can be heated shortly after installation. RESCOBOND 17G should NOT be installed by vibration casting methods.

RESCOBOND 17HP is a chemically-bonded, air-setting, single component refractory formulated to be handpacked in catalyst transfer line field joints, cones, nozzles, and other tight area applications in oil refineries. This product bonds to existing refractory and can be used to patch in-situ transfer lines, etc.

RESCOBOND 3000 is a chemically-bonded, air-setting, single component refractory castable. This product bonds to existing refractory and can be used in a variety of different applications including patching. To use, mix RESCOBOND 3000 with water and cast. It develops a quick set and can be heated shortly after installation.

RESCOBOND 3000A is a chemically-bonded, air-setting, single component, high alumina refractory castable formulated for molten aluminum contact applications. This product bonds to existing refractory and can be used in a variety of different applications including patching. To use, mix RESCOBOND 3000A with water and cast. It develops a quick set and can be heated shortly after installation

RESCOBOND 3000A G is an aluminum-resistant, phosphate bonded gun mix that can be installed by conventional gunning and handpacking methods. This product has been formulated to be a single component gun mix that can be gunned in hot or cold applications and develops a quick set. No predampening is needed prior to gunning. After the intial set, this product can be heated without using the traditional ramp-and-hold heatup schedule

RESCOBOND 3000G is a chemically-bonded, air-setting, single component gunning mix. This product can be installed by conventional gunning and handpacking methods and bonds to existing refractory. When gunning, predampening is NOT suggested for this gun mix. This product develops a quick set and can be heated shortly after installation. RESCOBOND 3000G should NOT be installed by vibration casting methods.

RESCOBOND 3000ZG is a single component, chemically bonded refractory gunning mix with improved gunning characteristics. This gun mix also contains a zircon addition. It develops a quick set and can be heated shortly after installation to provide a fast “back on line” capability for your unit. It’s chemical bonding system provides adherence to existing refractory, making it an effective patching material. RESCOBOND 3000ZG can be installed by gunning or hand-packing techniques. Predampening is NOT suggested for this gun mix prior to installation

RESCOBOND 70AG is a chemically-bonded, single component gunning mix formulated for molten aluminum maintenance applications. This product can be installed by conventional gunning and handpacking methods and bonds to existing refractory. When gunning, predampening is NOT suggested for this gun mix. This product develops a quick set and can be heated shortly after installation. RESCOBOND 70AG should NOT be installed by vibration casting methods.

RESCOBOND 90 is a chemically-bonded, air-setting, single component, high purity alumina refractory castable. This product bonds to existing refractory and can be used in a variety of different applications including patching. To use, mix RESCOBOND 90 with water and cast. It develops a quick set and can be heated shortly after installation.

RESCOBOND 90A is a chemically-bonded, air-setting, single component, high purity alumina refractory castable formulated for molten aluminum contact applications. This product bonds to existing refractory and can be used in a variety of different applications including patching. To use, mix RESCOBOND 90A with water and cast. It develops a quick set and can be heated shortly after installation.

RESCOBOND 90A G is an aluminum-resistant, phosphate bonded gun mix that can be installed by conventional gunning and handpacking methods. This product has been formulated to be a single component gun mix that can be gunned in hot or cold applications and develops a quick set. No predampening is needed prior to gunning. After the intial set, this product can be heated without using the traditional ramp-and-hold heatup schedule.

Rescobond AA-22S is a chemically bonded, erosion resistant, single component refractory material used primarily in thin lining applications to protect against severe abrasion. To prepare for use, blend Rescobond AA-22S with water. Rescobond AA-22S is an air setting material. It can also be used to patch other refractory linings.

Rescobond BRUSH MIX DRY is a dry material that when mixed with water is ideal for strengthening existing refractory lining surfaces. It can be applied up to ¼” thick providing increased refractory protection without a great loss of volume to your unit. Additional water can be added to adjust the consistency. It can be applied with a brush, trowel, rubber float, roller, sprayer, etc. It hardens in air and becomes non-hydroscopic when heated to only 250 - 300°F.

Rescobond MAAX, like Rescobond AA-22S, is a chemically bonded, erosion resistant, single component refractory material used primarily in thin lining applications to protect against severe abrasion. To prepare for use, blend Rescobond MAAX with water. Rescobond MAAX is an air setting material, and it utilizes the same binder system as Rescobond AA-22S. It can also be used to patch other refractory linings. Rescobond MAAX is an upgraded version of Rescobond AA-22S.